Start with the selected model. Battery chemistry, watt-hours, how the battery is packed and the transport route all affect the shipping review. This article is a buyer checklist, not a statement that every SCSETC product has the same battery or transport documents.
What does UN 38.3 tell you?
UN 38.3 is a set of transport tests for lithium cell and battery designs. The test summary identifies the tested design and provides key information about the test results. It is not a certificate for the whole motorcycle intercom, and it does not replace a shipping classification or packing decision. The IATA battery guidance and the UN Manual of Tests and Criteria are useful starting points.
When you receive a summary, compare its battery manufacturer, model and technical details with the approved product specification. If the battery in the finished intercom differs from the one described in the file, ask for an explanation before booking freight.
Installed, packed with equipment or shipped alone?
These are different shipping situations. A rechargeable lithium-ion battery installed in an intercom is not documented in the same way as a spare battery packed beside it or a battery shipped by itself. For air freight, IATA distinguishes lithium-ion batteries contained in equipment, packed with equipment and shipped alone. The correct classification and packing instruction depend on the real shipment, not the marketing name of the product.
Tell the freight forwarder whether each carton contains complete intercoms only, extra batteries, charging cases or other battery-powered accessories. If an OEM pack changes, review the shipping file again.
Documents to request before the first shipment
| Record | What to check |
|---|---|
| Approved product specification | Intercom model, battery chemistry, battery model, nominal voltage, capacity and watt-hours. |
| Battery specification and UN 38.3 test summary | Identity of the tested cell or battery design and whether it matches the production build. |
| Packing configuration | Battery installed or packed separately, quantity per unit and carton, and any spare batteries. |
| Transport instructions | Applicable route, carrier conditions, package marks and declarations as confirmed by a qualified shipper or forwarder. |
| Commercial documents | Consistent model names, descriptions, quantities and accessories across invoice and packing list. |
The test summary generally needs to be made available; it does not automatically have to accompany every package as a printed sheet. Carriers and destinations may ask for additional material, so confirm the current requirement for the planned route. IATA's 2026 guidance explains the distinction.
What changes should trigger another check?
- A different cell or battery supplier, design, capacity or pack arrangement.
- An added spare battery, charging case or battery-powered accessory.
- A new carton quantity or packing method.
- A change from sea to air transport, or to a different carrier or destination.
Ask the project team to identify the affected record and its revision. A new product label or battery code should not quietly drift away from the transport documents.
Questions buyers often ask
Does a UN 38.3 summary prove that the whole intercom is approved for sale?
No. It addresses the tested battery design for transport. Market-entry requirements for the finished intercom are a separate review.
Can we reuse a test summary from another model?
Only after confirming that the installed battery design and the scope of the summary match. Similar appearance or capacity alone is not enough.
Who decides the final shipping classification?
The shipper and qualified logistics provider should check the actual goods, packing and current route rules. Ask them to document the decision before dispatch.
