QUALITY CONTROL

How We Inspect Motorcycle Intercoms

What inspections do our products go through during production? Here’s a look at the checks, from the outer shell and buttons to Bluetooth, sound, battery and final packaging. The checks that apply can vary by model and project.

7 stages28 checksChecks vary by model
STAGE 1

Appearance & Structural Inspection

We start with what you can see and touch: the outer shell, how it fits together, the buttons and the connectors.

  1. Appearance Inspection

    We look for scratches, uneven color, stains and other visible defects on the outer shell.

  2. Assembly Inspection

    We check that the housing fits together neatly, the seams line up and the assembled unit feels secure.

  3. Button Function Test

    We press the power, volume and function buttons to see how they respond.

  4. Connector Inspection

    We look at the Type-C port and any earphone or microphone connectors used by the model.

STAGE 2

Bluetooth Connection Inspection

Next, we check whether the intercom connects to a phone and stays connected during use.

  1. Bluetooth Pairing Test

    We check that a phone can find the intercom, pair with it and connect.

  2. Connection Stability Test

    We watch for dropped connections or other interruptions while Bluetooth is in use.

  3. Bluetooth Range Test

    We check how far the Bluetooth connection works in the agreed test setup.

  4. Device Compatibility Test

    We try the intercom with the phones and operating systems chosen for the project.

STAGE 3

Intercom Communication Inspection

Then we turn to rider-to-rider communication. Group checks apply only to models that support group intercom.

  1. Intercom Connection Test

    We pair two intercom units and check that they connect as the model is designed to do.

  2. Intercom Range Test

    We check how far riders can communicate in the agreed test setup.

  3. Multi-Rider Intercom Test

    On models with group intercom, we set up a rider group and check that members can talk to one another.

  4. Intercom Audio Quality Test

    We listen to the conversation for clear speech and unwanted distortion.

  5. Intercom Stability Test

    We keep the intercom connected for an extended period and watch for interruptions.

STAGE 4

Audio Performance Inspection

We also listen closely to the speakers and microphone, then try the music and call controls.

  1. Speaker Audio Test

    We play audio through the speakers and check both left and right channels, where the model has them.

  2. Microphone Test

    We speak into the microphone and check how the voice sounds during a call.

  3. Noise Reduction Test

    Where the model has noise reduction, we check how it handles background sound and wind noise in the agreed setup.

  4. Music Playback Test

    We play and pause music, then try the music controls available on the model.

  5. Phone Call Test

    We answer a call, talk and hang up to check each step.

STAGE 5

Battery & Charging Inspection

For the battery, we look at capacity, how long the unit runs and what happens while it charges.

  1. Battery Capacity Test

    We measure battery capacity using the method agreed for that model.

  2. Battery Life Test

    We check how long the unit runs during music, calls and intercom use, as applicable.

  3. Charging Performance Test

    We check charging current, charging time and whether the unit charges normally.

  4. Charging Protection Test

    We check the charging safeguards and how the unit reacts to the abnormal conditions included in the test plan.

STAGE 6

Environmental & Reliability Inspection

Riding can mean rain, heat, cold and vibration. We check the conditions that apply to the selected model.

  1. Waterproof Test

    Where a water-protection rating applies, we test against the rating specified for that model.

  2. Temperature Test

    We check how the unit works in the hot and cold conditions set for the product.

  3. Vibration Test

    We check whether the unit stays secure and works after the planned vibration test.

  4. Aging Test

    We run the unit for the agreed period and watch for problems over time.

STAGE 7

Final Factory Inspection

Before the product leaves the factory, we take one more look at the software, functions and finished package.

  1. Firmware & Function Test

    We confirm the firmware version and try the available functions, watching for anything unusual.

  2. Final Quality Inspection

    We check the finished unit, accessories, packaging and labels before release.

Find your next step.

Type at least 2 characters to search.